Firmware Install – D-Link DIR2150

Download the Zip File by clicking the link: DIR-2150A1_V105B01

Folow these 9 steps to install your firmware successfully:

Step 1: The downloaded file should appear at the bottom left or the top right of your screen, or it will go directly to the ‘Downloads’ folder on your computer.

Chrome

Firefox

Step 2: Open the Zip file, right click on the IMG file, then click ‘Copy’

Step 3: Go to your Desktop and right click / paste the file there (or into another folder of your choosing)

From a computer that is connected to your WiFi router via WiFi or Ethernet, go to http://192.168.0.1/

Step 4: Login using the Admin password.   This should be on the card that came with your router, below the WiFi password.

Step 5: Go to the Management menu, then select ‘Upgrade’

Step 6: Click on the ‘Select File’ button

Step 7: Navigate to the Desktop or the folder where you copied the ‘DIR-2150A1_V105B01.img’.

Step 8: Select the file, and then click ‘Open’

You should see it listed in the router interface:

Step 9: Click the ‘Upload’ button, Click OK, then wait for the upgrade to occur.

The router will reboot during the process and may take up to 10 minutes.