Important Mercku M2 Firmware update – Branded
Download the Zip File by clicking the link: M2-M2R2-fw-v1.1.1_0014
Folow these 7 steps to install your firmware successfully:
Step 1: The downloaded file should appear at the bottom left or the top right of your screen, or it will go directly to the ‘Downloads’ folder on your computer.
Chrome
Firefox
Step 2: Open the Zip file, right click on the SKY file, then click ‘Copy’
Step 3: Go to your Desktop and right click / paste the file there (or into another folder of your choosing)
From a computer that is connected to your WiFi router via WiFi or Ethernet, go to mywifi.skymesh.net.au
Step 4: Login using the Admin password. This should be at the bottom of you Mercku router or on the card that came with your router, below the WiFi password.
Step 5: Go to the ‘Upgrade Firmware’, then select ‘Offline Update’
Step 6: Drag and drop your SKY file into the Upload section
Step 7: Select the firmware that will be used and click on the ‘Upgrade’ button.
Step 8: Wait until it’s loaded and you should be fine.
The router will reboot during the process and may take up to 10 minutes.